Ford Fusion: Opening and closing the bonnet
Opening the bonnet
1. Pull the lever.
2. Raise the bonnet slightly and pull thecatch towards you.
3. Open the bonnet and support it withthe strut.
Closing the bonnet
Note: Make sure that the bonnet isclosed properly.
Lower the bonnet and allow it to dropfrom under its own weight for the last20 – 30 centimetres.
General information
Have your vehicle serviced regularly tohelp maintain its roadworthiness andresale value. There is a large network ofFord Authorised Repairers that are thereto help you with their professionalservicing ...
Engine compartment overview - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V
(Sigma)/1.6L Duratec-16V (Sigma)
A. Engine coolant reservoir*: See Engine coolant check.
B. Brake and clutch fluid reservoir (right-hand drive)*: See Brake and clutch
fluid check.
C. Engine oil filler cap*: See Engine oil check ...
See also:
Whiplash Protection System – WHIPS
The WHIPS system consists of specially designed hinges and brackets on the front
seat backrests designed to help absorb some of the energy generated in a collision
from the rear (when the vehicl ...
Instrument Panel Illumination Control
The brightness of the instrument panel lighting and steering wheel controls can be adjusted.
:
Move and hold the thumbwheel up or down to brighten or dim the lights. ...
Forward-facing child restraint installation
using LATCH
Refer to all Warnings and Cautions in the “Child
Safety” and “Child Restraint” sections before installing
a child restraint.
Follow these steps to install a forward-facing
child restrain ...
