Nissan Maxima: Instrument brightness control
The instrument cluster illuminates when the ignition switch is in the ON position.
The instrument brightness control operates when the headlight control switch is in the AUTO, or position.
Turn the control left or right to adjust the brightness of the instrument panel lights when driving at night.
The instrument brightness control will not adjust the brightness when the headlights or parking lights are off.
Daytime running light system (Canada only)
The headlights automatically illuminate at a reduced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF p ...Turn signal switch
Turn signal (1) Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. Lane change signal (2)- To signal a lane change ...See also:
All-Wheel Drive warning light (AT and CVT models)
WARNING
Continued driving with the AWD warning light flashing can lead to powertrain
damage. If the AWD warning light flashes, promptly park in a safe place then check
whether all four tires ar ...
Warning signals
To help prevent the vehicle from moving unexpectedly by erroneous operation of
the Intelligent Key or to help prevent the vehicle from being stolen, a chime or
buzzer sounds from inside and outsid ...
Removing the Spare Tire and
Tools
The equipment you need is located
in the trunk.
1. Open the trunk.
2. Remove the spare tire cover.
3. Turn the retainer nut
counterclockwise and remove
the spare tire.
4. Place the spare t ...