Nissan Altima: Installing covers to rear parcel shelf
CAUTION
Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break.
Install the top tether anchor cover or key cylinder cover as follows:
1. With the pin on one end kept free of its hinge 1 , align the pin of the other end and slide it into the hinge 2 .
2. With the first pin in position 2 , align the second pin with its hinge slot 1 and push down on the cover to completely engage it. A snap sound will be heard.
3. Close the cover.
Removing covers from rear parcel shelf
Remove the top tether anchor cover or key cylinder cover as follows: 1. Lift the cover to the full open position. 2. Rotate the cover in the direction shown, disengaging the hinge at 1 and sli ...Wheels and tires
If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. ...See also:
Driver Efficiency Gauge
For eAssist vehicles, this gauge
assists in driving efficiently and will
vary based on driver input.
To maximize efficiency, keep the
gauge pointed in the solid green
zone in the center of ...
Maintenance services
You should exercise the utmost care to prevent damage to your vehicle and injury
to yourself whenever performing any maintenance or inspection procedures.
Should you have any doubts concerning the ...
Turn and Lane-Change Signals
Turn Signal
Move the signal lever down (for a left turn) or up (for a right turn) to the
stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to ...