Subaru Legacy: Illumination brightness control
The illumination brightness of the clock display, audio, air conditioner, multi function display and meter/gauge dims under the following conditions.
● when the light switch is in the “ ” or “ ” position
● when the light switch is in the “AUTO” position and the headlights illuminate automatically
You can adjust the illumination brightness for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
● When the control dial is turned fully upward, the illumination brightness becomes the maximum and the automatic dimming function does not work at all.
● The brightness setting is not canceled even when the ignition switch is turned to the “LOCK” position.
Turn signal lever
To activate the right turn signal, push the turn signal lever up. To activate
the left turn signal, push the turn signal lever down. When the turn is finished,
the lever will return automaticall ...
Front fog light switch (if equipped)
The front fog lights operate under the following conditions.
● when the light switch is in the “”
position
● when the light switch is in the “AUTO” position and the headlight ...
See also:
Audio system types
Without navigation system and Display Audio system
With Display Audio system
Owners of models equipped with a Display Audio system should
refer to the “Display Audio System Owner's Manual” ...
Technical specifications
Vehicle fluids
* Providing it meets the specification defined by WSS-M2C913-C, you can also
useFord Engine Oil or an alternative engine oil.
Topping up the oil: If you are unable to find an oil ...
Customization that can be configured at Toyota dealer
Settings (e.g. light sensor sensitivity) can be changed.
NOTICE
■To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not running. ...
