Chrysler 200: Illuminated Entry — If Equipped - Things to know before starting your vehicle - Chrysler 200 Owners ManualChrysler 200: Illuminated Entry — If Equipped

The courtesy lights will turn on when you press the unlock button on the Remote Keyless Entry (RKE) transmitter or open any door.

This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in “Understanding The Features Of Your Vehicle” for further information.

The interior lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position..

NOTE:
• The front courtesy overhead console and door courtesy lights do not turn on if the dimmer control is in the Dome ON position (extreme top position).

• The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).

    To Disarm The System
    Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key into the ignition lock cylinder and turn the key to the ON/START position. NOTE: • The driver’s door key cy ...

    Remote Keyless Entry (RKE) — If Equipped
    This system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from distances approximately 66 ft (20 m) using a Remote Keyless Entry (RKE) transmitter. The RKE ...

    See also:

    General information
    This section describes the functions andfeatures of the Bluetooth mobile phoneand voice control system. The section covers the followingvariations: • a mobile phone with a mobile phonecradle witho ...

    Tire and Loading Information Label
    Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). The Tire and Loading Information label shows the number of occup ...

    Silencing the horn beep feature
    If desired, the horn beep feature can be deactivated using the Intelligent Key. To deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 tim ...