Nissan Altima: Headlight beam select
1 To select the high beam function, push the
lever forward. The high beam lights come on
and the 
light illuminates.
2 Pull the lever back to select the low beam.
3 Pulling and releasing the lever flashes the headlight high beams on and off.
Autolight system (if so equipped)
The autolight system allows the headlights to be
set so they turn on and off automatically. The
autolight system can:
● Turn on the headlights, front parking, tail,
license plate and instr ...
Battery saver system
If the ignition switch is placed in the OFF position
while the headlight switch is in the
or position, the headlights will
turn off after
5 minutes.
CAUTION
Even though the battery saver feat ...
See also:
Sunglasses Holder
To open the sunglasses holder, push
then release the indent. It will
unlatch and swing down. To close it,
push it until it latches. Make sure the
holder is closed while you are driving.
S ...
Activating/deactivating ESP®
WARNING
The ESP® should not be switched off during
normal driving.
Disabling of the system will result in the
following:
- no restriction to engine torque
- loss of system-supported ...
When you do not tow a trailer
● Remove the ball mount from the hitch receiver tube and insert the receiver
cover onto the hitch receiver tube.
● Place the dust cap over the four-pin connector of the hitch wire harne ...
