Kia Optima: Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location.
When you must make such an emergency stop, always pull off the road as far as possible.
The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition switch.
To turn the hazard warning lights off, push the switch a second time.
Instrument cluster
Type A
Type B 1. Tachometer 2. Engine
temperature gauge 3. Fuel gauge 4. Speedometer 5. Turn signal indicators 6.Warning
and indicator lights (if equipped) 7. Odometer/Trip computer (if equippe ...
Lighting
Battery saver function
• The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the exterior lights when the driver removes
the ignition ...
See also:
Belt height adjustment
You can adjust the seat belt height on the
driver's seat and the front-passenger seat.
Wagon: you can also adjust the belt height
on the outer rear seats.
Adjust the height so that the upper p ...
Charge warning light
If this light comes on while the engine is running,
it may indicate the charging system is not functioning
properly. Turn the engine off and check
the generator belt. If the belt is loose, broken ...
Traction
When driving on wet or slushy roads, it is possible for a
wedge of water to build up between the tire and road
surface. This is hydroplaning and may cause partial or
complete loss of vehicle con ...
