Mercedes-Benz E-Class: Engaging park position P
•► Push the DIRECT SELECT lever in the direction of arrow P.
The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is stationary or driving at very low speed, and the transmission is in position D or R. This function depends on the date of manufacture of your vehicle.
If the engine speed is too high or the vehicle is moving, do not shift the automatic transmission directly from D to R, from R to D or directly to P. The automatic transmission could otherwise be damaged.
HOLD function or DISTRONIC PLUS: the automatic transmission automatically switches to transmission position P if the vehicle is braked by the HOLD function or DISTRONIC PLUS. In addition, at least one of the following conditions must be fulfilled:
- the engine is switched off.
- the driver's door is open and the seat belt
is not in the buckle.
Transmission position and drive
program display
The current transmission position and drive
program appear in the multifunction display.
1. Transmission position display
2. Drive program display
The arrows in the transmission position
d ...
Engaging parking position P in AMG
vehicles
•► If the vehicle is stationary, press P
button 1. ...
See also:
Touch screen operation
Selecting the item:
Touch an item to select. To select the “Navigation”
key, touch the “Navigation” key 1 on the
screen. Touch the “BACK”key 2 to return to the
previous screen.
Ad ...
FM
FM signals only reach about
16 to 65 km (10 to 40 mi). Although
the radio has a built-in electronic
circuit that automatically works to
reduce interference, some static can
occur, especially ...
Instrument Cluster Descriptions
1. Temperature Gauge
The temperature gauge shows engine coolant temperature.
Any reading below the red mark of the gauge shows
that the engine cooling system is operating properly. The
gauge poi ...
