Chrysler 200: Electronic Speed Control – If Equipped
• Do not use in hilly terrain or with heavy loads.
• When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
• Use speed control in flat terrain and with light loads to maximize fuel efficiency.
Automatic Transmission
The DRIVE range can be selected when towing. However,
if frequent shifting occurs, select the 3 range (for a
four-speed automatic) or select a lower gear using the
AutoStick shift control.
NOTE ...
Cooling System
To reduce potential for engine and transmission overheating,
take the following actions:
• City Driving
When stopped for short periods of time, shift the transmission
into NEUTRAL and increase ...
See also:
Selecting preset channels
Presetting a channel with a preset button allows you to select that channel in
a single operation. Up to six SAT1, SAT2 and SAT3 channels each may be preset. ...
Tire Rotation and Required
Services Every 12 000 km/7,500 mi
Rotate the tires, if recommended for
the vehicle, and perform the
following services. See Tire
Rotation.
• Check engine oil level and oil
life percentage. If needed,
change engine oil and ...
Switching the reception on/off
1. "Navigation"
2. "Options" Open.
3. "Receive Traffic Info" ...
