Toyota Camry: Eco Driving Indicator Light and current fuel consumption gauge customization - Instrument panel light control button - Instrument cluster - When driving - Toyota Camry Owners ManualToyota Camry: Eco Driving Indicator Light and current fuel consumption gauge customization

Toyota Camry / Toyota Camry Owners Manual / When driving / Instrument cluster / Instrument panel light control button / Eco Driving Indicator Light and current fuel consumption gauge customization

Eco Driving Indicator Light can

Eco Driving Indicator Light can be activated or deactivated

  1. While the odometer is being displayed, press and hold the display change button to display the Eco Driving Indicator Light customization screen
  2. Press the display change button to set Eco Driving Indicator Light to on or off.
  3. Press and hold the display change button to complete the setting

Type B

Eco Driving Indicator Light and

Eco Driving Indicator Light and current fuel consumption gauge can be activated or deactivated

  1. While the odometer is being displayed, press and hold the display change button to display the Eco Driving Indicator Light customization screen
  2. Press the display change button to set Eco Driving Indicator Light to on or off.
  3. Press and hold the display change button to complete the setting

If off is selected, Eco Driving Indicator Light and the current fuel consumption gauge (if equipped) will not be displayed.

    Instrument panel light control button
    The brightness of the instrument panel lights can be adjusted. Type A Pressing the button will adjust brightness of the instrument panel lights. Type B Pressing the button will adjust br ...

    The meters and display illuminate when
    Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. ...

    See also:

    Arming the System
    To arm the system, press on the RKE transmitter. The alarm automatically arms after about 30 seconds. The security light, located on the instrument panel, flashes. Press on the RKE transmi ...

    Operating HomeLink®
    Press the appropriate HomeLink® button. The HomeLink® indicator light should come on. The HomeLink® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as lo ...

    Scan tuning (SCAN)
    If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for ...