Mercedes-Benz E-Class: Checking tire pressure electronically - Tire pressure monitor - Tire pressure - Wheels and tires - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Checking tire pressure electronically

•► Make sure that the SmartKey is in position 2  in the ignition lock.

•► Press the steering wheel to select the Service button on the steering wheel to select the Service menu.

•► Press the Tire Pressure. button to select Tire Pressure.

•► Press the The current tire pressure for each wheel will button.

The current tire pressure for each wheel will be displayed in the multifunction display.

If the vehicle has been parked for longer than 20 minutes, the Tire pressures will be displayed after driving a few minutes message appears in the display.

After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.

If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you when the pressure drops ...

    Tire pressure monitor warning messages
    If the tire pressure monitor detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. A warning tone also sounds and the tire pressure ...

    See also:

    Belt warning for the driver and front passenger
    Regardless of whether the driver and front passenger have fastened their seat belts already, the seat belt warning lamp lights up for 6 seconds after every engine start. It then goes out if t ...

    Programming A Rolling Code
    For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is a ...

    Fuses
    Two types of fuses are used. Type (A) is used in the fuse boxes in the engine compartment. Type (B)- is used in the passenger compartment fuse box. Type A fuses are provided as spare fuses. They ...