Subaru Legacy: Checking the brake pedal free play - Brake pedal - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Checking the brake pedal free play

1) 0.08 – 0.18 in (2 – 5 mm)

1) 0.08 – 0.18 in (2 – 5 mm)

Stop the engine and firmly depress the brake pedal several times. Lightly pull the brake pedal up with one finger to check the free play with a force of less than 2 lbf (10 N, 1 kgf).

If the free play is not within proper specification, contact your SUBARU dealer.

    Brake pedal
    Check the brake pedal free play and reserve distance according to the maintenance schedule in the “Warranty and Maintenance Booklet”. ...

    Checking the brake pedal reserve distance
    1) More than 2.56 in (65 mm) Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure the distance between the upper surface of the pedal pad and the floor. When the me ...

    See also:

    Window Fogging
    Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side ...

    Washing the car
    The following points should be kept in mind when washing and cleaning the car: The car should be washed at regular intervals since dirt, dust, insects and tar spots adhere to the paint and may ...

    Sun visors
    To set the visor in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the vis ...