Toyota Camry: Battery-saving function
The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time.
●In the following situations, the smart key system may take some time to unlock the doors.
• The electronic key has been left in an area of approximately 6 ft. (2 m) of the outside of the vehicle for 10 minutes or longer.
• The smart key system has not been used for 5 days or longer.
●If the smart key system has not been used for 14 days or longer, the doors cannot be unlocked at any doors except the driver’s door. In this case, take hold of the driver’s door handle, or use the wireless remote control or the mechanical key, to unlock the doors.
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the “ENGINE START STOP” switch off. When the indicator light on the key surface is not on ...Electronic key battery-saving function
When battery-saving mode is set, battery depletion is minimized by stopping the electronic key from receiving radio waves. Press twice while pressing and holding . Confirm that the electroni ...See also:
Injured persons
NISSAN recommends that injured persons use seat belts. Check with your doctor
for specific recommendations. ...
ABS warning light
The ABS warning light illuminates when the ignition switch is turned to the “ON”
position and turns off after approximately 2 seconds.
This is an indication that the ABS system is working pro ...
Pinch Protect Feature
This feature will detect an obstruction in the opening of
the sunroof during Express Close operation. If an obstruction
in the path of the sunroof is detected, the
sunroof will automatically ret ...