Mazda Mazda6: After Getting In
l Are all doors closed and locked? - Is the seat adjusted properly? - Are the inside and outside mirrors adjusted? - Is the steering wheel adjusted properly? - Is everyone's seat belt fastened? - Check all gauges.
- Check all warning lights when the ignition is switched ON.
- Release the parking brake and make sure the brake warning light goes off.
Always be thoroughly familiar with your Mazda.
Before Getting In
l Be sure the windows, outside mirrors, and outside lights are clean.
- Inspect inflation pressures and condition of tires.
- Look under the vehicle for any sign of fluid leaks.
- If you plan to ba ...
Break-In Period
No special break-in is necessary, but a few precautions in the first 1,000 km
(600 miles) may add to the performance, economy, and life of your Mazda.
- Do not race the engine.
- Do not maintain o ...
See also:
Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not d ...
Tires
To safely operate your vehicle, your
tires must be the proper type and
size, in good condition with adequate
tread, and correctly inflated.
The following pages give more
detailed information ...
Seatbelt warning light and chime
NOTE
If your seatbelt warning device does not operate as described in the following,
it may be out of order. Have the device inspected and, if necessary, repaired by
the nearest SUBARU dealer.
Y ...
