Mercedes-Benz E-Class: Activation conditions - HOLD function - Driving systems - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Activation conditions

You can activate the HOLD function if:

 - the vehicle is stationary.
 - the engine is running.
 - the driver's door is closed or your seat belt is fastened.
 - the parking brake is not applied.
 - the hood is closed.
 - the transmission is in position D, R or N.
 - DISTRONIC PLUS is deactivated.

    General notes
    The HOLD function can assist the driver in the following situations:  - when pulling away, especially on steep slopes  - when maneuvering on steep slopes  - when waiting in ...

    Activating the HOLD function
    •► Make sure that the activation conditions are met. •► Depress the brake pedal. •► Quickly depress the brake pedal further until HOLD display 1 appears in the multif ...

    See also:

    Indicators for maintenance
    Indicators for maintenance 1. Engine oil replacement indicator This indicator appears when the customer set distance comes for changing the engine oil. You can set or reset the distance for cha ...

    Changing a Flat Tire
    If you have a flat tire while driving, pull over safely. Drive slowly along the shoulder until you get to an area far away from traffic lanes. The vehicle can easily roll off the jack, se ...

    Traffic bulletins on the map
    "Traffic conditions/gray map" Active: indication on the control display is switched to shades of gray. This enables a better view of the traffic bulletins. Day/night mode is not taken ...