Subaru Legacy: “up” and “down” switch
With radio mode selected
Press the switch to the “” or “” side briefly to skip to a preset channel. Press the switch to the “” or “” side for more than 0.5 second to seek the next receivable station and stop at it.
That station’s frequency will be indicated on the audio display.
With CD mode selected
Press the switch to the “” side to skip forward in the track/file (track) order. Press the switch to the “” side to skip back ward in the track/file (track) order. The track/file (track) number will be shown on the audio display.
With SAT mode selected
Press the switch to the “” side to skip forward in the channel order. Press the switch to the “” side to skip backward in the channel order. When the switch is briefly pressed, the channel will skip every 1 channel. When the switch is pressed for more than 0.5 second, the channel will skip every 10 channels. The channel will be shown on the audio display.
MODE button
This button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in the following sequence. *1: The frequency last received in the selected waveba ...Volume control switch
Press the switch to the “+” side to increase the volume. Press the switch to the “−” side to reduce the volume. A number indicating the volume will be shown on the audio display. ...See also:
Jacking Instructions
WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
• Always park on a firm, level surface as far from
the edge of the roadway ...
Engine compartment
CAUTION:
Never use a fuse of a higher or lower amperage rating than specified on the fuse
box cover. This could damage the electrical system or cause a fire.
If any electrical equipment does not ...
DRIVE
This range should be used for most city and highway
driving. It provides the smoothest upshifts and downshifts,
and the best fuel economy. The transmission
automatically upshifts through underdr ...