Buick LaCrosse: 3.6L V6 Engine - Engine Air Cleaner/Filter - Vehicle Checks - Vehicle Care - Buick LaCrosse Owners ManualBuick LaCrosse: 3.6L V6 Engine

3.6L V6 Engine
3.6L V6 Engine

1. Remove the screws on top of the engine air cleaner/filter housing.

2. Lift the filter cover housing away from the engine.

3. Pull out the filter.

4. Inspect or replace the engine air cleaner/filter.

5. Lower the filter cover housing toward the engine.

6. Install the screws on the top of the housing to lock the cover in place.

WARNING!
Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. Use caution when working on the engine and do not drive with the air cleaner/filter off.

Notice:
If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it.
Always have the air cleaner/filter in place when you are driving.

    2.4L L4 Engine
    2.4L L4 Engine 1. Remove the six screws on top of the engine air cleaner/filter housing. 2. Lift the filter cover housing away from the engine air cleaner/filter housing. 3. Pull out the ...

    Cooling System
    The cooling system allows the engine to maintain the correct working temperature. When it is safe to lift the hood: 2.4L L4 Engine 2.4L L4 Engine A. Engine Cooling Fans (Out of View) B. C ...

    See also:

    Initialization of power window
    If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. ● One-touch auto up/down function ● Anti-entr ...

    Freeing A Stuck Vehicle
    If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back ...

    Inflating tires
    The tire sealing system can be used to inflate the tires. To do so: 1. Park the car in a safe place. 2. The compressor should be switched off. Ensure that the on/off switch is in position 0 (the 0 ...